Model 130 Blow-On Automatic Label Applicator

Designed for non-contact applications or where container recessed areas require accurate label placement, this Blow-On Applicator works at any angle and special rotational mounts are available. The standard label vacuum grid is 1/2" x 4 1/2". Custom vacuum grids can be made to accommodate most label sizes. The Model 130 Blow-On Applicator is ideal for custom applications where other labeling methods are inefficient.

Model 130 Blow-On Automatic Label Applicator Features

BLOW-ON OPERATIONAL SEQUENCE
The product is consistently guided to the applicator and can be moving or stopped at the point of application. The label is stripped from the web and is held on a blow grid by vacuum. When the sensor or switch detects the product, the label is blown onto the product with a blast of air.

Model 130 Blow-On Automatic Label Applicator Specifications

• Dimensions: 17"/43cm
• Weight: 35 lbs/16kg (approx.)
• Electric: 115VAC/60Hz/1 AMPS (max.) or 220VAC/50Hz
• Air: 80 to 100 PSI G/3 CFM
• Labels: Standard 4 1/2" web width 10" O.D. roll with 3" core
• Die cut with 1/8" spacing
• Labeling Speed: 1250" continous web speed per minute

If you are interested in this product:

• Contact Us
• Print This Page

More Automatic Labelers

• LD-100RS-SS Automatic Label Dispenser
• Model 110S Servo Control Label Applicator
• Model 110 Wipe-On Label Applicator
• Model 140 Tamp-Down Automatic Label Applicator
• Model 160 Stepper Drive Label
• Model 165 Wipe-On Label Applicator (New E Series)
• Model 461 Cartridge Produce Label Applicator