Model 140 Tamp-Down Automatic Label Applicator

AutoLabe's Automatic Tamp-Down Label Applicator applies a pressure sensitive label utilizing a positive tamp action to ensure completed label adhesion on the product container or package. Tamp heads of different material from hard to spongy allow for product variation or surface differences. The Tamp-Down Applicator may be used in any direction and a variety of tamp heads are available.

Model 140 Tamp-Down Automatic Label Applicator Features

TAMP-DOWN OPERATIONAL SEQUENCE
The product is consistently guided to the applicator and can be moving or stopped at the point of application. The label is stripped from the web and is held on a tamp head by vacuum. When the sensor or switch detects the product, the air cylinder extends pressing the label onto the product.

Model 140 Tamp-Down Automatic Label Applicator Specifications

• Dimensions: 17"/43cm
• Weight: 35 lbs/16kg (approx.)
• Electric: 115VAC/60Hz/1 AMPS (max.) or 220VAC/50Hz
• Air: 80 to 100 PSI G/3 CFM
• Labels: Standard 4 1/2" web width 10" O.D. roll with 3" core
• Die cut with 1/8" spacing
• Labeling Speed: 1250" continuous web speed per minute

If you are interested in this product:

• Contact Us
• Print This Page

More Automatic Labelers

• LD-100RS-SS Automatic Label Dispenser
• Model 110S Servo Control Label Applicator
• Model 110 Wipe-On Label Applicator
• Model 130 Blow-On Automatic Label Applicator
• Model 160 Stepper Drive Label
• Model 165 Wipe-On Label Applicator (New E Series)
• Model 461 Cartridge Produce Label Applicator